Please note the Model CS4 power supply units are now discontinued.
Model
4G-Dual Front Panel Display
Cryomagnetics is pleased to introduce the Model 4G Superconducting Magnet Power Supply.
4G represents our “4th Generation” of power supplies optimized for superconducting magnet operation. Over the past 20 years, Cryomagnetics has refined power supply designs on a wide variety of superconducting magnets. This experience has made our Model 4G the most advanced superconducting magnet power supply available today.
All Model 4G power supplies are 4-quadrant,true bipolar systems featuring smooth sweeps through zero. All are equipped with USB, Ethernet, and IEEE-488.2 interfaces.
A full color, backlit TFT liquid crystal display clearly indicates output current, voltage, limit settings, and system status. No other superconducting magnet power supply provides such complete information to the user on the front panel.
The Model 4G is available in several configurations to fit your application. The single output Model 4G-100 features a bipolar output of ± 100 amperes at up to 600 watts (± 10 volts up to 60 amperes, ±6 volts at 100 amperes)
Current settability with the Model 4G power supply is 0.1 milliamps — an order of magnitude better than the present Model CS4 power supply offers. Stability will be ± 0.005% of Imax, or 2 mA, whichever is greater.
A persistent switch heater (PSH) power supply is included in the Model 4G. Two PSH supplies are standard in the dual output model.
Cryomagnetics has taken the popular programmable sweep rate range introduced in the Model CS4 power supplies and increased the ranges from three (3) to five (5). Versatile programmability allows the user to specify several different sweep rates for different current ranges of the magnet – making it possible to sweep a magnet slower in a particular range if it is more sensitive there without user intervention. A fast ramp capability up to 10 amperes/second is also included.
Safety features include magnet quench detection and protection, automated ramp down of current in case of an error, input power loss, and over temperature. There are safety interlocks for persistent switch enable/disable and changing of important magnet parameters and limits. A visual confirmation of current present in leads will alert users to be mindful of safety when operating the power supply, even if line power is off.
The Model 4G-200 is a single output model with output current up to 200 amperes at 1200 watts (± 10 volts up to 120 amperes, ± 6 volts at 200 amperes).
The Model 4G-Dual contains two independently operable ± 100 amperes at 600 watt power modules. The TFT LCD display will indicate output current and voltage of both supplies. Control of both supplies is easily accomplished via the front panel or via computer control.
The Model 4G-SHIM will have the capability to charge/discharge a superconducting magnet and also charge/discharge supercon shim coils as found on NMR and ICR systems. While charging the main coil, the Model 4G-SHIM will automatically cycle each shim coil’s persistent switch heater to dump induced current.
CE-mark is pending for European configurations. Input power is 220Vac (± 10%),50/60Hz.
Contact us today!
 |
|
4G-Dual Rear Panel View |
| Model Number | Current Output | Output Voltage |
| 4G-100 | ± 100 amperes | ± 10.00 volts |
| 4G-Dual | TWO ± 100 amperes Modules | ± 10.00 volts |
| 4G-200 | ± 200 amperes | ± 10.00 volts |
| 4G-SHIM* | ± 100 amperes | ± 10.00 volts |
| Full color, backlight LCD display |
| True bipolar operation |
| 0.1 mA current settability |
| USB, Ethernet, and IEEE-488.2 computer interfaces standard |
| Intuitive menu system |
| Persistent switch heater power supply. |
| Variable ramp rate over 5 ranges |
| ± 10 volt output available for all versions, CE-Marked. |
| Fully quench protected |
| LabVIEW® drivers available at no extra charge. |
| 15 feet length output cables. |
sales@cryomagnetics.com
Please contact us for more information!
1006 Alvin Weinberg Drive
Oak Ridge, Tennessee 37830
USA
Phone: (865) 482-9551
Fax: (865) 483-1253
All information subject to change due to design improvements.
Updated 8/13/07.
Return to Electronic Instrumentation
Page