Home » Components » Liquid Helium Level Sensors

Liquid Helium Level Sensors

Categories: ,
Description
Specifications
Support

Cryomagnetics’ Line of Superconducting Liquid Helium Level Sensors offer low liquid helium consumption and proper venting in any mounting orientation. Cryomagnetics’ level sensors are compatible for use with all Cryomagnetics’ liquid helium level instruments including the Model LM-510 Liquid Cryogen Monitor. Standard sensors are available in three different outside diameter sizes and in active sensing lengths from 1cm to 200cm, in integral multiples of 1cm. Each sensor has an overall length 2cm greater than the active sensing length. All standard sensors are provided with four 30cm long #30 AWG teflon insulated leads for internal cryostat connections (color-coded, twisted phosphor-bronze leads are available). Custom sensors with longer inactive sections are quoted per your specifications.

Available Models

Model Outside Diameter Active Sensing Lengths Overall Lengths
2D 4.76 mm O.D. (3/16″) 1 to 43 cm active sensing length Up to 45 cm overall length
3D 6.35 mm O.D. (1/4″) 1 to 109 cm active sensing length Up to 111 cm overall length
3DA* 6.35 mm O.D. (1/4″) 1 to 109 cm active sensing length Up to 111 cm overall length
4D 9.52 mm O.D. (3/8″) 110 to 200 cm active sensing length Up to 202 cm overall length
FLEX 9.52mm O.D. (3/8″) Flexible Up to 200 cm active sensing length Up to 202 cm overall length

* Features a hermetically-sealed electrical connector on top of the sensor. Top 152mm (6″) of the sensor is 6.35mm (1/4″) O.D. stainless steel tubing. This allows the sensor to be easily removed when used with a compression fitting installed on the dewar (not included).

To order, specify by:

Model Number – Active Sensing Length (cm) – Overall Length (cm)

i.e. 3D-56-58 = 1/4″ OD Sensor with 56 cm AL and 58 cm OAL

Title

Go to Top